Re: Enabling network for VM
But I have configured IP settings for VMnet8, which is used for NAT, correct? So how can I switch my VM networks to bridged?
View Articlehow to make a better performance during storage vmotion?
I have a local storage and I add a iSCSI storage to the host.But when I migrated VM from the local storage to iSCSI storage I got a poor performance?How to configure the network between ESXI and iscsi...
View ArticleRe: Need to set "vSphere Distributed Switch" after fresh install ESXi 5.1 ??
So you only upgrading one host in the cluster to 5.1? or only 1 is having a fresh install? The DVS settings are set at the vCenter level and you just add hosts into it, so the DVS setup is not going to...
View Article100% successful P2V leaves multiple empty(?) delta files
I have done a successful P2V test conversion from a Symantec System Recovery image. Although it completed successfully, vCenter told me that "Virtual machine disks consolidation is needed." When I go...
View ArticleRe: how to make a better performance during storage vmotion?
it all depends how the iSCSI on the back end is configured for a starters disk speed, raid configbut network wise you really need jumbo frames, separate nic or nics and yes vMotion should have its own...
View ArticleRe: Software required to get the report of unused VMs
Thank you Danny. I have gotten the report of idle VMs through vCenter Operation Manager(VCOP 5.7.1).
View ArticleRe: CPU Ready vs CPU Wait
Ok wait is a tricky one which can mean nothing but can mean something is wrong.basically %wait + %rdy + %cstp + %run = 100% %RDY is the amount of time the virtual machine is ready to use a pCPU but has...
View ArticleRe: how to set up vmware channel between primary and secondary vCenter...
> Make sure the VLAN is in layer 2, otherwise, Channel Network won't work.Would you elaborate on this? How? In this case, I did not add any physical adapter as dvUplink and tried to configure...
View ArticlePerformance Graph required of last week or month through vCenter 5.0 u2
I need to get the performance graph through vCenter Server 5.0 update 2 but it provide data only one day. How can get the report of CPU ,Memory, Disk and network performance graph of last weak or...
View ArticleRe: Multiple interfaces on one Virtual Machine
I tested that on a simple manually created virtual machine with RHEL6.4 and 2 virtual NICs - result was the same. I even have GUI on that machine, open settings for network, put 2 IPs that I can use...
View ArticleRe: Hardware suggestion to increase workload for current VM
1. your motherboard supports up to 16GB, so you can add more memory. But check hw-compatibility list for supported modules.2. that depends on how much you have to pay for ddr2-ram. I'd try to get 2nd...
View ArticleRHEL 6.x Support for JEOS
Recently I have been evaluating JEOS support for our latest product line. Our requirement is to have just enough os with base os as RHEL 6.4. When i directly tried to use jeos tool on VMWare studion I...
View ArticleRe: View 5.2 Pool settings for vDGA
Hi mcrampton, I have exactly the same configuration (R720 + Grib K2 and Vshpere 5.1 + View 5.2 and driver Nvidia 310 on VM). Every thing is working nice with SVGA 3D and I'm compelled to disable it in...
View ArticleRe: unable to connect to vcenter srever
i have stop and start the world wide web service then after vcenter service is started thanks for intimidate response
View ArticleRe: Automatically add Platform to Group
Right now there is no way to automatically add servers. Hyperic supports only static groups.Starting from 5.8. which will be released on Q4-13, Hyperic introduces dynamic groups.
View Articlewhat is the advantage of separating the ESXI OS from the Data?
Hi,I would like to purchase a Server for my production.should I set the server with 2 disks in Mirror for the ESXI OS and 3 disks in RAID 5 for the Data or I can just have all disks in Raid 5 (both the...
View ArticleRe: Total Vm count shows as Zero(0) in Vcloud Director.
Hi Kyle, Thanks for your update on this post. Currently i don't have any VMs running under the Vcloud Director.Could you share me the reference links for "how to create VMs in Vcloud director"?. Thanks...
View ArticleRe: SSO LDAP запрет гостевого доступа
Дело в том, что все пользователи в одном OU. Так что такой вариант не прокатит. Мне просто не понятен момент, почему все пользователи находясь во вкладке Disabled Usersне являются отключенными. В...
View ArticleRe: IOPs & Latency For Each VM
I did double check and found out data only existed as of 3AM 2 days ago. I adjusted the interval and the numbers came out properly. Thank you!
View ArticleRe: Cannot to upload large (over 4GB size) ISO images to my catalog media on...
vplsnickm, It is not the size. Need proof? just uploaded a 4.2 GB file into my vcloud director and it got uploaded. i also have attached the screenshot below.
View Article